Hydromatic SW Series Pumps
- Carbon-Ceramic Mechanical Shaft Seal
- Oil-Filled Motor with Automatic Reset Thermal Overload
- Uses Single-Row Ball Bearing Construction
- Piggyback Plug for Easy Maintenance and Replacement
Description
BODY CONSTRUCTION: Cast Iron & Engineered Thermoplastic
HORSEPOWER: Available in 1/3 or 1/2 HP
MAXIMUM HEAD: S_33: 26 ft. (7.9 m) / S_50: 29 ft. (8.8 m)
MAXIMUM CAPACITY: S_33: 48 GPM (3.0 LPS) / S_50: 65 GPM (4.1 LPS)
FLOW at 10′ LIFT: S_33: 40 GPM / S_50: 54 GPM
SWITCH TYPE: Available with Wide-Angle Tethered, Vertical, or Diaphragm Switch
MINIMUM SUMP DIAMETER: S_33: 18″ (457.2 mm) / S_50: 18″ (457.2 mm)
DISCHARGE PIPE SIZE: 1-1/2″ NPT
MAXIMUM SOLIDS HANDLING SIZE: S_33: 3/8″ (9.5mm) / 3/4″ (19.1 mm)
AMP DRAW (full load): S_33: 10 Amps / S_50: 12 Amps
CORD LENGTH: 10′, SJTW (20′ optional)
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 120°F (49°C)
IMPELLER CONSTRUCTION: Thermoplastic
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Brands | |
| Hydromatic SW Series | SW-33A1-20 Hydromatic Pump, SW-50A1-20 Hydromatic Pump |
