SW50 Sewage Pump

TECHNICAL DATA
Physical Data:
DISCHARGE SIZE 2” NPT Flanged Discharge,
3” NPT Optional
IMPELLER TYPE 2-Vane – Cast Iron
CABLE LENGTH 20’
Liquid Handling:
SOLIDS SIZE 2”
MAXIMUM LIQUID TEMP. 104°F – Intermittent
ACCEPTABLE PH RANGE 6-8
Temperature:
WINDING INSULATION TEMPERATURE 130°C
Technical Data:
POWER CORD TYPE SJTOW
MOTOR HOUSING Cast Iron
CASING Cast Iron
IMPELLER Cast Iron
MOTOR SHAFT SS430
HARDWARE SST
“O” RINGS NBR
SEAL Single Mechanical
Carbon Ceramic
UPPER BEARING 6202
LOWER BEARING 6203
ELECTRICAL DATA
R.P.M. 1750
MOTOR TYPE PSC/Induction
GENERAL INSULATION CLASS B
STATOR WINDING CLASS B
MAXIMUM STATOR TEMPERATURE 130°C
VOLTAGE TOLERANCE ±10%
MOTOR PROTECTION Thermally Protected
HP 1/2
VOLTAGE 115/208/230/460
PHASE 1/3
SERVICE FACTOR 1
FULL LOAD AMPS 115V/1PH/12.0 230V/1PH/6.0 230V/3PH/4.5 460V/3PH/2.3 208V/1PH/7.5 208V/3PH/4.7